Clean Up Fresh Scent With Bleach, With Trigger
Active Ingredients: Sodium Hypochlorite 1.84%. Other Ingredients 98.16%. Total 100.00%.
Removes Stains & Disinfects (when used according to the disinfections directions). Directions for Use: It is a violation of Federal law to use this product in a manner inconsistent with its labeling. To Clean and Disinfect Hard, Nonporous Surfaces: Turn nozzle counterclockwise to on. Spray 6-8 inches from surface and allow product to penetrate tough stains and messes. Treated surface must remain visibly wet for 30 seconds. Wipe with a wet sponge or cloth and rinse with water. No scrubbing required. For visibly soiled surfaces, preclean surface before disinfecting. Prolong contact with metal, old porcelain or worn plastic laminate may cause discoloration. To Spray Every Drop: Tilt bottle at downward angle while spraying. To Refill: Turn trigger on spray bottle counter clockwise and pull upward to remove. After refilling spray bottle, replace trigger by aligning red tip on trigger to small opening inside bottle and push down. Safe for Use on: Glazed porcelain (Avoid prolonged contact with porcelain); Glazed ceramic; Corian; Plastic laminate; Fiberglass; Enamel. Storage and Disposal: Store this product in a cool area to avoid deterioration. Do not reuse or refill except as described in the directions for use. Refill only with this product. Recycle empty container or discard in trash. Align to close.