Versatile Stain Remover
Add to every load. Mix until completely dissolved. Use warm or hot water; do not heat or boil. Do not mix/store solution in a sealed container. Cleaner, Whiter, Brighter: Whites, Colors: Safe for all colors. Top Loader: Fill washer with water. Add Oxiclean and detergent before adding laundry. Fill to line 1 for regular loads, or more for large or heavily soiled loads. HE Washer (Do not mix OxiClean with detergent in the dispenser. Read your HE owner's manual for instructions): Add OxiClean to washer before adding laundry. Tough Laundry Stain: Tablecloths, Uniforms: Soak for best results. 1. Mix: Fill to line 2 to 4 per gallon of water. Submerge stained items in solution after dissolved. Line 2-4. Line 2 for typical stains or Line 4 for extra tough stains. 2. Soak 1-6 hours. Depending on severity of stain, some stains may require more time to soak. For best results soak for 6 hours. 3. Wash as normal with detergent and OxiClean. Soft Surface Stains: Carpets, Upholstery: Use only rug on water-washable upholstery and rugs. Mix: Fill to line 1 per 16 ounces of water. Remove excess stains before treating. For Carpet: Apply only enough solution to saturate stain. Allow solution to stand 1-5 minutes. Do not allow solution to dry on fabrics. Blot with white towel. Repeat until stain is not visible. Rinse carpet with clean water and blot until dry. For Upholstery: Do not apply solution directly on stain. Apply with clean white towel and use towel to blot out stain. Repeat until stain is not visible. Then, dampen a clean white towel with water and blot area to rinse. Hard Surfaces: Grout, Patio: 1. Mix: Fill to line 4 per gallon of water. Note: For some surfaces like grout, a more concentrated solution/paste may be used. 2. Apply using a cloth, sponge, brush or by pouring solution directly onto surface. 3. Let stand 5-30 min. Scrub as needed. For large surfaces, work with small areas, so solution does not dry on the surface. 4. Rinse well with cool water. Read before use. 1. Always test OxiClean on an inconspicuous area first. Rinse, allow to dry. Safe on colorfast fabrics only. 2. Follow manufacturer's instructions for water temperature and for cleaning garment or item. 3. Do not use on wool, wool blends, silk, silk blends, leather or on fabrics labeled dry clean only. Not for use on jewelry, latex paints, woven baskets, unpainted wicker, jute, teak or finished woods. Metals must not be soaked and must be rinsed immediately and thoroughly. Not for use on rust, dried paint, or bleach damage. Safe for septic tanks. 4. OxiClean works best in warm to hot water. If washing with cold water, first dissolve OxiClean in 16 oz of warm to hot water. Add to cold water. 5. Treat stains while fresh. Always rinse well with cool water. Do not place fabric that has not been thoroughly rinsed into dryer. 6. Some stains require repeated or longer treatments. Adding more Oxiclean powder than directed increases the risk of color loss. Additional english & spanish directions on insert inside.